Time: 2022-12-29 Views: 506
Due to the compression ratio, the air always contains different degrees of dust and other impurities, and the excessive content of gray sand and impurities in the air is quite harmful to the compressor。The main hazards are:
(2) Dust into the cylinder and lubricating oil mixed, will form coke in the air valve, piston ring, hinder mechanical lubrication, causing cylinder, pull;And in the case of high temperature surface sand of the compressor, it will cause explosion risk。
(3) Ash sand enters the compressor, which is easy to block the air valve, cooler, air pipeline and pneumatic machinery, resulting in the non-tightness of the equipment and reducing the air volume。
(4) Dust entering the compressor will increase the wear of the compressor parts, destroy the lubrication of the compressor, affect the cooling of the gas, and increase the final temperature of the compressed gas, and the power consumption will also increase sharply Due to the compression ratio, the air always contains different degrees of dust and other impurities, and the excessive content of gray sand and impurities in the air is quite harmful to the compressor。The main hazards are:
(1) If the sand in the air is hard, it will wear the cylinder, piston rod, filler and other parts and shorten its service life。
(2) Dust into the cylinder and lubricating oil mixed, will form coke in the air valve, piston ring, hinder mechanical lubrication, causing cylinder, pull;And in the case of high temperature surface sand of the compressor, it will cause explosion risk。
(3) Ash sand enters the compressor, which is easy to block the air valve, cooler, air pipeline and pneumatic machinery, resulting in the non-tightness of the equipment and reducing the air volume。
(4) Dust entering the compressor will increase the wear of the compressor parts, destroy the lubrication of the compressor, affect the cooling of the gas, and increase the final temperature of the compressed gas, and the power consumption will also increase sharply。